Cheap Way To Increase Ph In Pool

fiberglassswimmingpoolforsalenearme Palazzo Pools Fiberglass
How to Easily Raise Low Pool pH Factory Direct ChemicalsHow to Easily Raise Low Pool pH Factory Direct Chemicals

Introduction

Having a pool is a great way to relax and cool off during the hot summer months. However, maintaining the right pH balance in your pool is crucial for the health and safety of swimmers. If your pool’s pH level is too low, it can lead to skin and eye irritation, while a high pH can cause cloudy water and reduce the effectiveness of chlorine. In this article, we will discuss some cheap and effective ways to increase the pH in your pool without breaking the bank.

Testing the pH Level

The first step in addressing low pH levels is to test the water. You can purchase a pH testing kit from your local pool supply store or use a digital pH meter. Once you have determined that the pH level is below the recommended range of 7.2 to 7.8, it’s time to take action.

Baking Soda

If your pool’s pH level is slightly low, one of the cheapest and easiest ways to increase it is by using baking soda. Baking soda, also known as sodium bicarbonate, is a household staple that can be found in most kitchens. Simply sprinkle the baking soda evenly across the surface of the pool. Start with a small amount, around 1.5 pounds per 10,000 gallons of water, and allow it to dissolve before retesting the pH level. Repeat the process if necessary until the pH is within the desired range.

Soda Ash

If the pH level in your pool is significantly low, you may need a stronger solution. Soda ash, or sodium carbonate, is a cheap and effective way to increase the pH. However, it is important to handle it with care and follow the instructions on the packaging. Dissolve the required amount of soda ash in a bucket of water and pour it evenly around the pool. Be cautious not to add too much at once, as it can cause the pH to swing too high. After adding the soda ash, allow the water to circulate for a few hours before retesting the pH level.

READ:  Stairs For Pool Above Ground: A Must-Have Accessory For Safety And Convenience

Avoiding pH Fluctuations

Once you have successfully increased the pH level in your pool, it’s important to maintain it within the recommended range. Regularly test the water and make adjustments as needed. It is also beneficial to keep a consistent chlorine level, as chlorine can affect the pH balance. Additionally, monitor the total alkalinity and calcium hardness levels, as they can also impact the pH. By regularly maintaining these levels, you can prevent fluctuations and enjoy a safe and comfortable swimming experience.

Conclusion

Increasing the pH level in your pool doesn’t have to be expensive. By using simple and affordable solutions like baking soda and soda ash, you can easily bring your pool’s pH back to the desired range. Remember to test the water regularly and make necessary adjustments to ensure a safe and enjoyable swimming experience for everyone.

Leave a Reply

Your email address will not be published. Required fields are marked *

close